Looking for help?

Find answers to your questions





Carina D1 for Quest 3

Carina D1 for Quest 3_how to video

Cannot enable PC Internet Sharing

  1. Please check the network details after PC Internet Sharing is enabled on your PC by
      a. Click the windows, then type in the settings. Go to Settings > Network & internet.
      b. Double Click Puppis S1 and choose Details.
The correct and working properties should be as follows. Please provide us with a screencut if you see something different.
  1. Please download the https://drive.google.com/file/d/1KaGs_dudKvQ4cg6bYHU74y1kwe-pVIrU/view?usp=sharing and as administrator. This will enable the ICS (Internet Connection Sharing) Service and might help.
  2. If the above two steps do not resolve your issue, please manually edit the "IPv4 Address" and "IPv4 Subnet Mask" by following these steps:
      a. Right-click on 'Puppis S1' and select 'Properties' on the 'Network Connections' interface.
      b. Click on 'Internet Protocol Version 4 (TCP/IPv4)' on the 'Properties'.
      c. Manually edit these two fields to: IPv4 Address: and IPv4 Subnet Mask:
If you need to redo PC Internet Sharing every time you restart your computer, try the following method, which only needs to be done once.
  1. Update ICS service and add regedit for auto-run
    1. Right-click on the downloaded file and choose 'Run as administrator'.
    2. Close the pop-up window (no manual settings are required). This will enable the ICS (Internet Connection Sharing) Service and might help.
  2. The connection property is assigned by Windows Firewall. If it is set to "Public" when you use it , you may use the following guide to change it. This will be a one-time setting.
An error occurred while internet connection sharing was being enabled: internet connection sharing is currently enabled for connection 'wireless_32768'. Please try the following troubleshooting steps:
  1. Disable PC Internet sharing.
  2. To launch Device Manager, select the Start button, type Device Manager, and press Enter. Then follow these steps: a. Expand the node Network adapter that represents the type of device that you want to uninstall, right-click the device entry for the device you want to uninstall, and select Uninstall. b. On the Confirm Device Removal dialog box, make sure you unselect the Delete the driver software for this device option. When ready to complete the operation, select OK.
  3. Unplug then replug Puppis S1 USB Port to PC.